Beach flag M model A is a feather flag on a 310 cm mast with a 270 x 60 cm panel printed in UV
Advertising Flag M Model A
Pole height310 cm
Flag height270 cm
Flag width60 cm
on request
Category · 16 products
Winder Beach Flags
Winder beach flags consist of a segmented mast and a printed sleeve that moves with the wind. They are used by companies and institutions to mark a location and support brand visibility. Winder flags reach up to 470 cm in height.
16 products
Beach flag M model A in the double-sided PRO version: a 270 x 60 cm panel on a 310 cm PRO fibreglass pole, UV printed on both sides
Advertising Flag M Model A – Double-Sided PRO
Pole height310 cm
Flag height270 cm
Flag width60 cm
on request
Beach flag in size M, model B – 310 cm pole with a 270 x 60 cm flag panel and UV print
Advertising Flag M Model B
Pole height310 cm
Flag height270 cm
Flag width60 cm
on request
The M model B beach flag in the double-sided PRO version: a 270 x 60 cm panel on a 310 cm PRO fibreglass pole, UV printed on both faces
Advertising Flag M Model B – Double-Sided PRO
Pole height310 cm
Flag height270 cm
Flag width60 cm
on request
Beach flag M in model C is a set with a 310 cm pole and a 270 x 60 cm banner printed in UV technology
Advertising Flag M Model C
Pole height310 cm
Flag height270 cm
Flag width60 cm
on request
The M model C beach flag in the double-sided PRO version: a 270 x 60 cm panel on a 310 cm fibreglass pole, UV printed on both faces
Advertising Flag M Model C – Double-Sided PRO
Pole height310 cm
Flag height270 cm
Flag width60 cm
on request
Size M beach flag, model D: a 280 cm pole with a 240 x 90 cm panel finished with UV print
Advertising Flag M Model D
Pole height280 cm
Flag height240 cm
Flag width90 cm
on request
The M model D beach flag is a double-sided 240 x 90 cm flag on a 280 cm PRO fibreglass pole, printed with UV inks
Advertising Flag M Model D – Double-Sided PRO
Pole height280 cm
Flag height240 cm
Flag width90 cm
on request
Beach flag S model A is a set combining a 260 cm pole with a 220 x 60 cm flag panel printed in UV technology
Advertising Flag S Model A
Pole height260 cm
Flag height220 cm
Flag width60 cm
on request
Beach flag S model A in the double-sided PRO version: a 220 x 60 cm panel on a 260 cm fibreglass pole, UV printed on both sides
Advertising Flag S Model A – Double-Sided PRO
Pole height260 cm
Flag height220 cm
Flag width60 cm
on request
The S model B beach flag is a 220 x 60 cm panel on a 260 cm Standard mast, printed using UV printing
Advertising Flag S Model B
Pole height260 cm
Flag height220 cm
Flag width60 cm
on request
Size S sail-shaped beach flag, model B, with double-sided UV print on the panel and a PRO fibreglass pole 260 cm high
Advertising Flag S Model B – Double-Sided PRO
Pole height260 cm
Flag height220 cm
Flag width60 cm
on request
The S model C beach flag is a complete set with a 260 cm Standard pole and a 220 x 60 cm flag panel printed in UV technology
Advertising Flag S Model C
Pole height260 cm
Flag height220 cm
Flag width60 cm
on request
Beach flag S model C in the double-sided PRO version: a 220 x 60 cm panel on a 260 cm PRO fibreglass pole, UV printed on both sides
Advertising Flag S Model C – Double-Sided PRO
Pole height260 cm
Flag height220 cm
Flag width60 cm
on request
Beach flag S model D is a set with a 215 cm Standard mast and a 175 x 60 cm banner printed using UV technology
Advertising Flag S Model D
Pole height215 cm
Flag height175 cm
Flag width60 cm
on request
The S model D beach flag is a set with a 260 cm PRO fibreglass pole and a 220 x 60 cm fabric printed on both sides in UV technology
Advertising Flag S Model D – Double-Sided PRO
Pole height215 cm
Flag height175 cm
Flag width60 cm
on request
Model comparison
How do the models differ?
| Model | Advertising Flag M Model Aon request | Advertising Flag M Model A – Double-Sided PROon request | Advertising Flag M Model Bon request | Advertising Flag M Model B – Double-Sided PROon request |
|---|---|---|---|---|
| Pole height (cm) | 310 cm | 310 cm | 310 cm | 310 cm |
| Flag height (cm) | 270 cm | 270 cm | 270 cm | 270 cm |
| Flag width (cm) | 60 cm | 60 cm | 60 cm | 60 cm |
| Pole type used | Standard | PRO fibreglass pole | Standard | PRO fibreglass pole |
| View product | View product | View product | View product |
Case studies
All case studies →Our winder beach flags at clients
Buying guide
How to choose the right model?
Size S or size M – which flag to choose?
Winder flags come in two sizes. S covers masts of 215-260 cm and sleeves from 175x60 cm, M covers masts of 280-310 cm and sleeves up to 270x60 cm and 240x90 cm.
Size S works indoors and on trade fair stands, where the flag should not block the display. Size M is set up outdoors, at entrances and along routes, where the graphic is meant to be visible above head height.
How do sleeve models A, B, C and D differ?
The letter in the name refers to the shape of the sleeve. Models A, B and C are the narrow variants, 60 cm wide, differing in the cut of the top edge. Model D has a wider sleeve, 90 cm.
A narrow sleeve fits a logo and one line of copy, set vertically. A wider sleeve leaves room for additional content, but catches more wind, so it needs a heavier base.
Single-sided or double-sided PRO?
In the single-sided version the print is on one side of the sleeve, with a mirrored show-through on the other. This is enough where the audience looks from one direction: against a wall, along a road, or against the back of a stand.
The double-sided PRO version is printed on both sides, with no mirroring. It is chosen for pedestrian routes and entrances, where people pass in two directions.
Standard mast or fibreglass PRO?
The standard mast is enough for short-term and indoor display. The PRO fibreglass mast is flexible: in wind it bends and returns to vertical instead of transferring the whole load to the base.
For outdoor use lasting longer than one day, the PRO mast reduces the risk of permanent deformation.
Which base for which ground?
The base is not included in the set, because it is selected to suit the location. On paving and asphalt a cross base or a disc base is used, on grass and soil a ground spike, and in strong wind a water base.
It is worth agreeing the fixing method before ordering, because with a dozen or more flags in a row the choice of base affects installation time.
About this category
How durable are advertising flag poles?
Ario Event flag poles are made from corrosion-resistant materials such as aluminium and fibreglass.
Both solutions are durable and flexible, making them resistant to strong gusts of wind.
Poles – Standard
made from aluminium tubes finished in black, with the top section made from
fibreglass. This pole is designed for single-sided flags only.
Poles – PRO
made entirely from fibreglass finished in black. A pole with enhanced
durability. 24-month warranty! Designed for both single- and double-sided flags.
Poles – Regular
for portable rectangular flags, made from durable powder-coated black
aluminium. The top crossbar connects to the vertical elements
at a 90º angle, ensuring the flag is displayed perfectly
Which base should you choose for an advertising flag?
Choosing the right base for your flag affects its stability and safety. We offer a wide range of bases suited to different surfaces:
- Screw-in and spike bases:
ideal for sandy or grassy ground. - Cross bases:
designed for flat surfaces such as pavements or paved areas. - Heavy-duty bases:
provide maximum stability for larger flags. - Water or sand-fillable bases:
a practical, mobile solution that lets you adjust the flag's weight depending on weather conditions. Water- or sand-fillable bases are lightweight and easy to transport.
How do you care for advertising flags so they last longer?
Winder advertising flags are lightweight, functional structures that require no complicated handling or intensive maintenance. Thanks to high-quality materials, they're weather-resistant, making it simple to keep them clean without any specialist products.
- Dry the flag before storing it to prevent mould.
- Before packing the flag away, make sure the fabric is completely dry.
- Fold the fabric carefully to keep it looking its best.
- Keep the flag away from sharp objects and heavy items.
- Avoid exposing the flag to extreme weather conditions.
- Regularly check the condition of the print and fabric, and order a replacement or refresh of the graphics if needed.
Winder Beach Flags from a Polish manufacturer
ARIO designs, sews, prints and tests these products in its own facility in Poland. Standard production with full-surface printing takes 10 working days, and every unit is covered by a 12-month manufacturer's warranty.
See the related categories too: Air Dancers (Sky Dancers) and Promo Counters, or browse the project gallery.
Last updated: 10/2/2026
Questions and answers
Are Winder beach flags suitable for outdoor use?
Yes, these flags are weather-resistant and work in open spaces, for example in front of company premises, at outdoor events or at building entrances.
How long does it take to complete an order for Winder beach flags?
Standard lead time is 6-8 working days, depending on the number of flags ordered and the specifications chosen.
Is the print UV-resistant and washable?
Yes, we use UV printing technology, which gives the print durability and increased resistance to sunlight. Our flags can be washed without loss of colour quality.
How is a Winder beach flag assembled?
Assembly is quick: connect the mast segments, attach the flag to the structure and set it on the chosen base.
How should a Winder beach flag be looked after?
Flags should be checked regularly and washed at low temperature (max. 40°C), then dried before storage to avoid mould.